Whitney's Salvaged Shanty Turned Art

My next project came from one of my favorite people I met in Round Top at the Flea Market.  They were a couple from Gatesville, TX who used salvaged wood and tin to create some AMAZING pieces.  Lucky for me he was also selling his wood and tin.  This is a piece of salvaged tin that he sold to me for $12.  It's beautiful... I love the shape, the paint, the lack of paint and the rust.  What a combo!!

I knew I wanted to hang it just as it was but I did want to attach it to something... give it a little more beef.  This is what I did...

I purchased two 8 ft cedar fence posts from Home Depot.  These were about $2.00 a piece.

I started by marking off where I would cut.  I made each piece 2" longer than the tin and cut 4 of these pieces.

My tool of choice... my trusty $12 hand saw.  I had every piece cut in less than 3 minutes.

This is what my 4 cut pieces looked like...

I also bought a 3ft yard stake for $.59... how's that for shanty??

I cut two pieces 12" long... the same width as my tin.

I then used my Gorilla Wood glue to attach the stakes to the posts.

 I added glue to both pieces like this.

Before I attached them it looked like this...

Stuck together...

Then I used wood screws to make it even stronger...

When I was finished adding those it looked like this...

I repeated these steps on the other end as well.

My next step was the paint.  I used my favorite blue out there... Olympic Blue Willow satin latex paint from Lowe's.

I wanted it to look a bit shanty so I painted it but left some of the wood exposed as well.  It looked like this at that point.

After letting that dry I started distressing.  I used my 3M block sander with 80 grit paper to get my edges good and my corners better...

Then I added just a bit of Minwax Dark Walnut stain to the raw edges and corners.

Here's one corner soaking it in...

Awwwww... so much better... I just rubbed off the extra stain with an old rag.

My next step was to attach my tin to the wood.  I did this by using small finishing nails around the edges of the tin...

I added my d-rings to the back to hang my new art.

And it's all finished!!  I decided to put this in my powder bath that is BLANK at the moment.  This will be my inspiration for more projects in this room.

And here's a couple reasons why I LOVE me some old tin...

Thanks for stopping by!  Keep in mind that this cedar piece makes a great backdrop for many things not just tin!

Remember guys!!!

Get those Gorilla Glue projects together for our party coming up! You can check out all the details HERE.

Don't forget to grab our party button below!

<center><a href="http://shanty2chic.blogspot.com" target="_blank"><img border="0" alt="Shanty 2 Chic" src=" http://i936.photobucket.com/albums/ad205/whitters015/ggbutton-1.gif"/></a></center> I will be linking this up at Poppies at Play! 

  I will also be sharing this over at DIY Day at A Soft Place to Land !